您的位置: 标准下载 » 国内标准 » 行业标准 »

SN/T 1093-2002 进出口电流互感器检验规程

时间:2024-05-18 08:05:09 来源: 标准资料网 作者:标准资料网 阅读:8706
下载地址: 点击此处下载
基本信息
标准名称:进出口电流互感器检验规程
英文名称:Rules for the inspection of current transformers for import and export
中标分类: 电工 >> 输变电设备 >> 变压器
发布部门:中华人民共和国国家质量监督检验检疫总局
发布日期:2002-05-20
实施日期:2002-11-01
首发日期:1900-01-01
作废日期:1900-01-01
起草单位:国家认证认可监督管理委员会
出版日期:1900-01-01
页数:平装16开, 页数:7, 字数:10千字
适用范围

本标准规定了进出口电流互感器的抽样、检验及检验结果的判定。本标准适用于频率为15Hz~100Hz,额定电压不大于500kV,供电气测量仪表用和电气保护装置用的进出口电流互感器的检验。本标准不适用于进出口精密电流互感器的检验。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 电工 输变电设备 变压器
【英文标准名称】:QuantitiesandProceduresforDescriptionandMeasurementofEnvironmentalSound-Part3:Short-TermMeasurementswithanObserverPresent
【原文标准名称】:环境噪声的描述和测量用量值和程序.第3部分:有现场观测员的短期测量
【标准号】:ANSI/ASAS12.9Part3-1993
【标准状态】:现行
【国别】:美国
【发布日期】:1993
【实施或试行日期】:
【发布单位】:美国国家标准学会(US-ANSI)
【起草单位】:ANSI
【标准类型】:()
【标准水平】:()
【中文主题词】:加速度试验;声学测量;声学;定义;环境条件;极限(数学);测量技术;测量方法;噪声;噪声困扰;噪声测量;观察;污染控制;住宅噪音;住宅区;短期测量;现场测量;声音
【英文主题词】:Acceleratedtesting;Acousticmeasurement;Acoustics;Definition;Definitions;Environmentalcondition;Limits(mathematics);Measuringtechniques;Methodsformeasuring;Noise;Noiseannoyance;Noisemeasurements;Observation;Pollutioncontrol;Residentalnoise;Residentialareas;Short-termmeasurement;Sitesurveys;Sound
【摘要】:Thisstandarddescribesrecommendedproceduresformeasurementofshort-term,time-averageenvironmentalsoundoutdoorsatoneormorelocationsinacommunityforenvironmentalassessmentorplanningforcompatiblelandusesandforotherpurposessuchasdemonstratingcompliancewitharegulation.Thesemeasurementsaredistinguishedbytherequirementtohaveanobserverpresent.Methodsaregiventocorrectthemeasuredlevelsfortheinfluenceofbackgroundsound.
【中国标准分类号】:Z32
【国际标准分类号】:17_140_01
【页数】:26P.;A4
【正文语种】:英语


Product Code:SAE AMS3619
Title:Resin, Polyimide, Laminating High Temperature Resistant, 315Mdc (599Mdf)
Issuing Committee:Ams P17 Composite Materials Committee
Scope:This specification covers a single-component, heat-reactive, thermosetting aromatic system which thermally cures to form a polyimide polymer structure. This product has been used typically as a resin matrix for fiber-reinforced- composite parts requiring good strength after long-term exposure up to 315 degrees C (599 degrees F) and after short-term exposure up to 370 degrees C (698 degrees F), but usage is not limited to such applications.